www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Belt not riding true in rear drive  (Read 4921 times)

0 Members and 1 Guest are viewing this topic.

SneakyPete

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1611
  • AKA FGL
    • VA


    • CVO1: 2004 SEEG O/B- RIP
    • CVO2: 2009 SERG3 O/B
    • CVO3: 2014 SERK6 O/B
Re: Belt not riding true in rear drive
« Reply #15 on: January 08, 2021, 09:32:25 AM »
Zippers rear axle kit fixes this issue
Logged
Member Hillbilly Rocket Riders MC, Virginia THE FASTEST CHAPTER!

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4082

Re: Belt not riding true in rear drive
« Reply #16 on: January 08, 2021, 08:17:40 PM »
Quote from: SneakyPete on January 08, 2021, 09:32:25 AM
Zippers rear axle kit fixes this issue

Cheers,
I looked at that Zipper kit :o think I'll stick to what I've done with mine.

The cam adjusters are a bad setup they were a cheap nasty way of cost cutting. Obviously HD were not being concerned on how well the wheel is aligned on fitting and a lot of room for error on the belt deflection and the centering of it running in the pulley.

It took some fiddling about but found the issue was the right cam was pushing back more then the lift cam. Made a bit of modification on the cam now it can be adjusted independently from the left that will allow me to centre the belt once the deflection is set.
Logged
Pages: 1 [2]  All
« previous next »
 

Page created in 0.227 seconds with 25 queries.