Topic: 113 pistons and valve spring change (Read 1696 times)

trippy · « **on:** January 10, 2015, 10:30:04 AM »

Hi all,
Am doing a bottom end rebuild, truing crank, Timken case bearing, while at it would like to up the piston size a little using the
same 110 cylinders, 113 seems to be an option a lot are doing now, what would be the best pistons for the job bearing mind
my heads have been skimmed 30thou and I want to achieve 10 to 1 comp, also have been told by a couple of people over here
that the standard valve springs on the 110 cvo heads are a bit too much and it would be better to reduce the seat pressure a touch, anyone have any thoughts on this, would be grateful for any advice. Ride Safe.

HD Street Performance · « **Reply #1 on:** January 10, 2015, 11:03:33 AM »

113" is a good option with Mahle flat tops
The springs that will work are either Goodson (AV&V) HVS-6000S or HVS-6500S

*58Vette · « **Reply #2 on:** January 10, 2015, 07:35:25 PM »

I Would Agree With Don. Let Him Or Another Do Tor Heads. You'll Be Thankful.

Ridgerunr · « **Reply #3 on:** January 11, 2015, 08:51:10 AM »

Don, are the 6500S for higher lift cams?

HD Street Performance · « **Reply #4 on:** January 11, 2015, 10:27:56 AM »

Quote from: Ridgerunr on January 11, 2015, 08:51:10 AM

Don, are the 6500S for higher lift cams?

Yes thats right. I have not tried to take a stock head and valves and do this install. I have been told they work fine out of the box. The 6000s has coil bind at 1.200 and the 6500S at 1.15. I do use these springs all the time however I can check the installed heights, measure the pressures, and check for coil bind. These heads have had the seats cut and stem protrusion changed from stock dimensions.

trippy · « **Reply #5 on:** January 11, 2015, 04:51:32 PM »

Thanks for the info Don, Would you happen to know the Harley Part number for the Pistons?

HD Street Performance · « **Reply #6 on:** January 11, 2015, 06:32:07 PM »

Harley does not offer these. I have them in stock.

trippy · « **Reply #7 on:** January 11, 2015, 06:42:40 PM »

Hi don,

If you ship to the U.K., can you let me have your direct Email, so I can contact you for a quote for the pistons and valve springs.

Many thanks.

Mark.

trippy · « **Reply #8 on:** January 12, 2015, 03:41:43 AM »

Thanks Don,

Do you have a telephone number I can ring you on to order direct from you

thanks

Mark.

Ridgerunr · « **Reply #9 on:** January 13, 2015, 07:51:20 AM »

Quote from: trippy on January 12, 2015, 03:41:43 AM

Thanks Don,

Do you have a telephone number I can ring you on to order direct from you

thanks

Mark.

Unless it's changed Don can be reached at 253-691-5893

Author Topic: 113 pistons and valve spring change (Read 1696 times)

trippy

113 pistons and valve spring change

HD Street Performance

Re: 113 pistons and valve spring change

*58Vette

Re: 113 pistons and valve spring change

Ridgerunr

Re: 113 pistons and valve spring change

HD Street Performance

Re: 113 pistons and valve spring change

trippy

Re: 113 pistons and valve spring change

HD Street Performance

Re: 113 pistons and valve spring change

trippy

Re: 113 pistons and valve spring change

trippy

Re: 113 pistons and valve spring change

Ridgerunr

Re: 113 pistons and valve spring change