www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Removing Saddlebags on SERK3 to Adjust Works Shocks  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

Two Wheels

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 78
Removing Saddlebags on SERK3 to Adjust Works Shocks
« on: September 17, 2009, 02:56:22 PM »
Gents:

What order of activities do you do to remove the saddlebags ?   I know I can figure it out but without the manual thought I would ask for any hints on todo's not to do's.  I want to be able to adjust my Works Shocks, bit softer needed as I'm pretty light, and it seems to me that I have to remove the saddle bags to get to them.

For those of you with Works 13 inch shocks is any special tool needed ?   Bought the bike used so I dont have the manual.

Sorry for the easy hassle ...



Logged

Gecko

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 747
  • FLHRSEI.ORG
Re: Removing Saddlebags on SERK3 to Adjust Works Shocks
« Reply #1 on: September 18, 2009, 12:40:32 PM »
Saddle bag removal?  Turn the two fasteners inside a quarter turn counter-clockwise and pull them off.  Reverse to install.  Don't have Works shocks, so can't help with that part.
Logged
2007 SERK3, SERT, V&H Dresser Duals, Monster Ovals, IDS, HID, knocking sound, valve noise.

If you think it's the journey not the destination you don't live in Nebraska.

Black Diamond

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3363

    • CVO1: 11 FLHXSE2 "Vanessa"
    • CVO2: 08 FLHRSE4 "Lexi" "Bike from Hell"
    • CVO3: 02 FLHRSEI "Ruby"
Re: Removing Saddlebags on SERK3 to Adjust Works Shocks
« Reply #2 on: September 18, 2009, 03:15:16 PM »
Do you have the BARS system on your Works shocks?

JW
Logged

Two Wheels

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 78
Re: Removing Saddlebags on SERK3 to Adjust Works Shocks
« Reply #3 on: September 18, 2009, 06:25:49 PM »
yep, ARS system on there ...

trying to make them just a bit softer.
Logged

Black Diamond

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3363

    • CVO1: 11 FLHXSE2 "Vanessa"
    • CVO2: 08 FLHRSE4 "Lexi" "Bike from Hell"
    • CVO3: 02 FLHRSEI "Ruby"
Re: Removing Saddlebags on SERK3 to Adjust Works Shocks
« Reply #4 on: September 18, 2009, 06:33:45 PM »
Quote from: Two Wheels on September 18, 2009, 06:25:49 PM
yep, ARS system on there ...

trying to make them just a bit softer.

Turn the ARS counter clockwise to increase the spring travel. Make sure you make the same adjustment on both sides. Don't over do it but you still have the ARS to help when your carrying a BSR and/or gear. Good luck with it, experiment and take your time.

JW
Logged
 

Page created in 0.14 seconds with 25 queries.