Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[p watson]

does anyone make a 68 tooth rear pulley for an 08 touring bike

[timo482]

you want to go even taller gearing?

im going the other way - 30t trans sprocket

id rather get a 72 or 73 tooth rear wheel sprocket but those are not made

to

[p watson]

i put a 31 on the front a year ago looking for a little more.

[2018_FLTRXSE]

i put a 31 on the front a year ago looking for a little more.

go 30 and the shorter belt...

[p watson]

i was trying to stay with the stock belt and make the back of the bike look better at the same time.

[Pauldabare]

It usually easier and less expensive to change from the 32 tooth drive pulley to a 34 or 36 tooth and retain the standard belt.

Paul

[2018_FLTRXSE]

It usually easier and less expensive to change from the 32 tooth drive pulley to a 34 or 36 tooth and retain the standard belt.

Paul

That would make the gearing taller, not shorter correct?

[p watson]

I found out that a 1200 sporty is the same belt size and 68 teeth,ordered one from rc comp. looks great and gave me the gearing that i wanted without going to an aftermarket belt.

[ltank]

You put a 68 tooth Sportster 1 1/8" pulley on a Dresser? What tranny pulley did you use? How many teeth in the belt? How will the Sportster belt hold up?
 Will it hold 116 HP /  122 Tq ? Got a pic? Ona 6 speed tranny? Pleas give a little more detail.
Ltank

[ltank]

I went to Stealership ( 215 plus tax ) and got the part number for  06 Dyna # 40537-06 it's a 1 1/8" wide 68 tooth final drive sprocket (pulley- silver).
$165. bucks online plus 10 bucks shipping. I may need to machine the mounting flange on pulley for correct centering of the belt due to variances in models. Should not be a big deal. I hope!!!
Ltank