Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bschloss]

Anyone try a BadDad Fender with a 2012 SE Street Glide CVO Seat/Pillion? I have a 2008 SG w/ the BadDad Fender and want to know if I pick up the CVO Seat/Pillion if it will fit.....

Any Thoughts?

[Puzzled]

Fender cover or new complete fender?

[bschloss]

Sorry....Fender Cover.  I used the fender eliminator kit and have the fender cover.  You think the 2012 CVO SG SE seat will work  My stock seat will work through 2013 and it does work on my fender....so I'm guessing the CVO seat will too??

[Puzzled]

Is the 2012 a two piece seat, two post mount setup or a single rear post/bolt mount?

[bschloss]

two piece. Solo with the pillion.  two post mount w/ the single screw in the back to hold the pillion.  The fender uses the two posts to hold the fender in place.  I'm thinking this should be a simple set up.

[Puzzled]

You'll be fine. That is a similar setup to what I used on my 01.

[bschloss]

Yes, Similar...but did you have the two piece seat with the solo/removeable pillion?  If so does it fit the shape of the fender cover?  Looks like from your pic you have a stock 1 piece seat. ??

[Puzzled]

I would not worry about the seat bottom profile. It can be reshaped if needed. If metal, a little bending is in order... if plastic a heat gun works great.

I have the two piece seat now on my 13. Back when I did my 01 two piece seats weren't all that common let alone stock on a CVO.

I don't seat where there would be anything that would prevent me from doing what you are looking to do. Have at it.