Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 12" ape hangers on 09 cvo roadglide  (Read 6507 times)

0 Members and 1 Guest are viewing this topic.

lucy62

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
12" ape hangers on 09 cvo roadglide
« on: January 11, 2022, 12:16:58 PM »

Looking to install 12" miter cut Dominator bars on my '09 CVO Roadglide.  Anyone know if the stock clutch, brake and wiring can be used or if longer are required.
Logged

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2497
Re: 12" ape hangers on 09 cvo roadglide
« Reply #1 on: January 11, 2022, 05:17:22 PM »

I did 10" on mine and the clutch hose was too short.  I cheated and drilled a hole in the main tube and ran it through the frame and out the other side.  De-burred it well and added rubber gromets and all has been great for around 5 years now.

I don't remember having to do anything special with the wiring though.

Good luck!
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side
 

Page created in 0.212 seconds with 20 queries.