Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: connect a TomTom to the ACC-switch  (Read 11475 times)

0 Members and 1 Guest are viewing this topic.

Highjagger

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2523
  • tradition`s not worship ash but pass on the fire

    • CVO1: FXSE Breakout Pro Street 2016 ,- and 2011 Crossbones FLSTSB ,- and 2016 LowRider s FXDLs
Re: connect a TomTom to the ACC-switch
« Reply #15 on: January 27, 2009, 06:31:11 PM »

Aaah , thxs , i got it .  :2vrolijk_21:
Logged
Success is to stand up one more than to fall down

Trapperdog

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2965

    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2009 ST1300 Police
    • CVO3: 2006 ST1300
Re: connect a TomTom to the ACC-switch
« Reply #16 on: January 27, 2009, 07:49:48 PM »

yes, but u will have to have a 12v to 5v adapter. the cig plug adapter will not work if u wire here. cig lighter is 12v and adapter changes to 5v. if you cut adapter off of cord and plug to 12v it will kill ur tomtom. my hardwire sat radio came with hardwire adapter but you can problaby find 1 at electronics store. just find one that is 12v to 5v with the same size connection to the tomtom
Not doubting you but I am surprised the rider 2 uses a 5v system instead of 12v like garmen. I looked at their site and could not distinguish any type of transformer in the battery cord. They could just not be showing it though. As I recall, the Zumo's even came with a cig lighter adapter. It was just long enough to hit the tank on the FLH..'s at full left though. Tons of options if the rider 2 did use 12v . All cig adapters come with a built in fuse, usually a 10a though and needs to be replaced with a 2a if I am correct for the GPS's.
Logged

Gone Fishin'

  • The Director
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1984

    • CVO1: 2016 FLHTKSE Limited®, Black Sparkle and 2010 FLHTCUSE5 Ultra Classic®, Crimson Mist Black/Dark Slate, # 110 of 992
    • CVO2: 2007 FLHRSE3 Screamin' Eagle® Road King®, Black Ice, 1 of 1325
    • CVO3: 2001 FXDWG2, Scarlet Red and 2000 FXR4, Candy Tangerine, 1 of 316
Re: connect a TomTom to the ACC-switch
« Reply #17 on: January 28, 2009, 01:18:43 AM »

Not doubting you but I am surprised the rider 2 uses a 5v system instead of 12v like garmen. I looked at their site and could not distinguish any type of transformer in the battery cord. They could just not be showing it though. As I recall, the Zumo's even came with a cig lighter adapter. It was just long enough to hit the tank on the FLH..'s at full left though. Tons of options if the rider 2 did use 12v . All cig adapters come with a built in fuse, usually a 10a though and needs to be replaced with a 2a if I am correct for the GPS's.

The Tomtom uses 5v when connected to a charger, but 12v when connected to the bike. Highjagger, look at this site (in German) with detailed, almost scientific information: http://69hd.de/public/tomtomrider/rider4.html

Ride safely,
Louis
Logged

1914 10E, Grey
1956 FLH Custom, Candy Orange
1988 FXRS Custom, "S.O.A."
2000 FLSTF Custom Fat Boy, "Jumpin' Jack Flash"
2000 FXSTS Custom Springer Softail, Grey
2000 FXR4, Candy Tangerine
2001 FXDWG2, Scarlet Red
2005 FLHTCSE2, -9/07
2007 FLHRSE3, Black Ice
2008 FLHTCUSE3, -7/08
2009 FLHTCUSE4, -4/10
2010 FLHTCUSE5-BLK, Crimson Mist Black/Dark Slate
2012 VRSCDX ANV, Brilliant Silver Pearl
2016 FLHTKSE, Black Sparkle
2016 XL1200CX Roadster, Vivid Black
2018 FLFBS ANV
CVO 1480 IBA 26678

Highjagger

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2523
  • tradition`s not worship ash but pass on the fire

    • CVO1: FXSE Breakout Pro Street 2016 ,- and 2011 Crossbones FLSTSB ,- and 2016 LowRider s FXDLs
Re: connect a TomTom to the ACC-switch
« Reply #18 on: January 28, 2009, 03:07:23 AM »

@ Louis ,
great site , thxs , so the best is really to connect the TomTom to the ACC switch to only give power when it is empty .
Logged
Success is to stand up one more than to fall down

Trapperdog

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2965

    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2009 ST1300 Police
    • CVO3: 2006 ST1300
Re: connect a TomTom to the ACC-switch
« Reply #19 on: January 28, 2009, 10:15:06 AM »

The Tomtom uses 5v when connected to a charger, but 12v when connected to the bike. Highjagger, look at this site (in German) with detailed, almost scientific information: http://69hd.de/public/tomtomrider/rider4.html

Ride safely,
Louis
Interesting, that makes more sense.  Not understanding much German, does that mean the bike only runs the reader 2 and does not charge it while riding?
Logged

Indenial

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1750

    • CVO1: 2009 SE Road Glide
    • States Riden on 2009 CVO
Re: connect a TomTom to the ACC-switch
« Reply #20 on: January 28, 2009, 11:57:32 AM »

The Garmin Nuvi has a transformer that reduces the voltage too. It is in the cigarette lighter adapter on the cord.  We cut the wires off above the cigarette lighter after consulting with someone (idiot) at Garmin and wired it to the 12 v wiring of the bike and fried the Nuvi----it smoked and went dead!  So be sure to keep the tranformer if your unit has one on the cigarette lighter cord.
Logged
I just finished the pile of junk I needed to work on before I get to the stuff I should be doing----

BalDeagle

  • FLHRSE3 Candy Cobalt with Pale Gold Leafing Graphics
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2648
  • Do it today, tomorrow may be too late......
Re: connect a TomTom to the ACC-switch
« Reply #21 on: January 29, 2009, 05:09:03 AM »

I have hard wired both my last two Garmins direct to the Battery, feeding the cables under the Dashinator (very easy). The advantage of this system is that the unit comes on as soon as it is placed in the cradle and you can set it up/play with it without the bike running. I often look at some of the information it has collected at the end of a ride and it is nice to do this sitting on the bike with the engine off and cooling down (easier to talk to others at the same time). If I want the unit off I just press the "Off" button.

Works well for me.

Nige
Logged
Don't leave it until tomorrow, do it today !


110 SERK FLHRSE3
Power Commander
Doherty PowerPacc + PowerVents + Mystfree
Vance & Hines Slip ons + V & H True Duals
Lots of other shiny bits!

Gone Fishin'

  • The Director
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1984

    • CVO1: 2016 FLHTKSE Limited®, Black Sparkle and 2010 FLHTCUSE5 Ultra Classic®, Crimson Mist Black/Dark Slate, # 110 of 992
    • CVO2: 2007 FLHRSE3 Screamin' Eagle® Road King®, Black Ice, 1 of 1325
    • CVO3: 2001 FXDWG2, Scarlet Red and 2000 FXR4, Candy Tangerine, 1 of 316
Re: connect a TomTom to the ACC-switch
« Reply #22 on: January 29, 2009, 11:00:58 AM »

I have hard wired both my last two Garmins direct to the Battery, feeding the cables under the Dashinator (very easy). The advantage of this system is that the unit comes on as soon as it is placed in the cradle and you can set it up/play with it without the bike running. I often look at some of the information it has collected at the end of a ride and it is nice to do this sitting on the bike with the engine off and cooling down (easier to talk to others at the same time). If I want the unit off I just press the "Off" button.

Works well for me.

Nige
Exactly what I am saying. No separate switch. Now, as a member of the SERK style police I have to write you a ticket for placing these thingies in a way to obstruct the beauty of the bike!

Ride safely,
Louis
Logged

1914 10E, Grey
1956 FLH Custom, Candy Orange
1988 FXRS Custom, "S.O.A."
2000 FLSTF Custom Fat Boy, "Jumpin' Jack Flash"
2000 FXSTS Custom Springer Softail, Grey
2000 FXR4, Candy Tangerine
2001 FXDWG2, Scarlet Red
2005 FLHTCSE2, -9/07
2007 FLHRSE3, Black Ice
2008 FLHTCUSE3, -7/08
2009 FLHTCUSE4, -4/10
2010 FLHTCUSE5-BLK, Crimson Mist Black/Dark Slate
2012 VRSCDX ANV, Brilliant Silver Pearl
2016 FLHTKSE, Black Sparkle
2016 XL1200CX Roadster, Vivid Black
2018 FLFBS ANV
CVO 1480 IBA 26678

BalDeagle

  • FLHRSE3 Candy Cobalt with Pale Gold Leafing Graphics
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2648
  • Do it today, tomorrow may be too late......
Re: connect a TomTom to the ACC-switch
« Reply #23 on: January 29, 2009, 11:47:11 AM »

Exactly what I am saying. No separate switch. Now, as a member of the SERK style police I have to write you a ticket for placing these thingies in a way to obstruct the beauty of the bike!

Ride safely,
Louis

I'm right with you there Louis, but it normally looks like this - when it is not on an 8,500 mile trip round the USA  :bananarock:

Logged
Don't leave it until tomorrow, do it today !


110 SERK FLHRSE3
Power Commander
Doherty PowerPacc + PowerVents + Mystfree
Vance & Hines Slip ons + V & H True Duals
Lots of other shiny bits!

spydglide

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11889
  • spyder-psychle
Re: connect a TomTom to the ACC-switch
« Reply #24 on: January 29, 2009, 12:39:52 PM »

I'm right with you there Louis, but it normally looks like this - when it is not on an 8,500 mile trip round the USA  :bananarock:


;) A all-purpose bike for all seasons.   :-* har!  :drink: spyder
Logged
2004 FLHTCSE Cobalt 'Huckleberry'  .....94K+mi.     &  1994 FLSTN 'OleGranny' .....116K+mi.

Gone Fishin'

  • The Director
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1984

    • CVO1: 2016 FLHTKSE Limited®, Black Sparkle and 2010 FLHTCUSE5 Ultra Classic®, Crimson Mist Black/Dark Slate, # 110 of 992
    • CVO2: 2007 FLHRSE3 Screamin' Eagle® Road King®, Black Ice, 1 of 1325
    • CVO3: 2001 FXDWG2, Scarlet Red and 2000 FXR4, Candy Tangerine, 1 of 316
Re: connect a TomTom to the ACC-switch
« Reply #25 on: January 29, 2009, 01:02:49 PM »

I'm right with you there Louis, but it normally looks like this - when it is not on an 8,500 mile trip round the USA  :bananarock:

Okay, the SERK style police lets you off the hook.

Ride safely,
Louis
Logged

1914 10E, Grey
1956 FLH Custom, Candy Orange
1988 FXRS Custom, "S.O.A."
2000 FLSTF Custom Fat Boy, "Jumpin' Jack Flash"
2000 FXSTS Custom Springer Softail, Grey
2000 FXR4, Candy Tangerine
2001 FXDWG2, Scarlet Red
2005 FLHTCSE2, -9/07
2007 FLHRSE3, Black Ice
2008 FLHTCUSE3, -7/08
2009 FLHTCUSE4, -4/10
2010 FLHTCUSE5-BLK, Crimson Mist Black/Dark Slate
2012 VRSCDX ANV, Brilliant Silver Pearl
2016 FLHTKSE, Black Sparkle
2016 XL1200CX Roadster, Vivid Black
2018 FLFBS ANV
CVO 1480 IBA 26678

BalDeagle

  • FLHRSE3 Candy Cobalt with Pale Gold Leafing Graphics
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2648
  • Do it today, tomorrow may be too late......
Re: connect a TomTom to the ACC-switch
« Reply #26 on: January 29, 2009, 06:28:47 PM »

;) A all-purpose bike for all seasons.   :-* har!  :drink: spyder

S'right Spyd - and long may it stay that way  :drink:

Okay, the SERK style police lets you off the hook.

Ride safely,
Louis

You are a gentleman and a scholar Louis and I drink to you  :drink:

She will probably be complete with "thingies" when you get to see her though.

 :o

Nige
Logged
Don't leave it until tomorrow, do it today !


110 SERK FLHRSE3
Power Commander
Doherty PowerPacc + PowerVents + Mystfree
Vance & Hines Slip ons + V & H True Duals
Lots of other shiny bits!
Pages: 1 [2]  All
 

Page created in 0.237 seconds with 25 queries.