Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dead_Reckoning]

I like the looks and hopefully performance of the V&H Power Duals, which use the new "xpipe' technology.
Unfortunately the V& Pages say for 2009 and newer FLHRs.

Are there any other "Xpipe" Headers out there for a FLHR older than 2009?

Thanks
DR

[Midnight Rider]

I like the looks and hopefully performance of the V&H Power Duals, which use the new "xpipe' technology.
Unfortunately the V& Pages say for 2009 and newer FLHRs.

Are there any other "Xpipe" Headers out there for a FLHR older than 2009?

Thanks
DR

If I'm not mistaken, the crossover pipe is where the problem lies.  You can fit a 2009> oil pan to the "older" motor and be good to go.  Someone please correct me if I'm wrong.

[Sklywag]

The pan is required and is a direct swap.  The more difficult part is that there need to be mounting holes for the cross-under pipe mounting in the transmisson case.

Here is everything you need to know 

http://tinyurl.com/earlyexhaust

I have 90% of everything at this point to do it on my 06 SE Ultra.  Jan project when it's raining (hopefully) here in Phoenix.

[Dead_Reckoning]

Many Thanks for the information and the link.
Local HD says $96 for the pan, not bad.

DR

The pan is required and is a direct swap.  The more difficult part is that there need to be mounting holes for the cross-under pipe mounting in the transmisson case.

Here is everything you need to know 

http://tinyurl.com/earlyexhaust

I have 90% of everything at this point to do it on my 06 SE Ultra.  Jan project when it's raining (hopefully) here in Phoenix.